ISCSI configuration

Hello everyone,

I write to ask you some information about the ISCSI binding configuration. Exactly I have two host ESXi with one 10 Gbit network card each and one storage ISCSI with four IP adrress; this is an example of the configuration:

host 1:

IP address : 10.10.10.2 --> two socket in bonding conneted at two switch in stack

host 2 :

IP address : 10.10.10.3 -->two socket in bonding conneted at two switch in stack

Now, I tested the multipath redundancy changing the owner path on the storage , and all works correctly; but I have one doubs releted to the configuration of the ISCSI binding... I have to configure necessarily the ISCSI binding with two ip address for each network card or this configuration is fine anyway?

Thanks,

Woz