using -match I want to write output in a statement
I'm trying to write a script that connects to a vcenter server and searches for a vm with an ip address that gets entered by the person running the script. I've got it working pretty good with the...
View ArticleRe: Load balancing with HAProxy and CA signed certificates
This is my current config file frontend LBVIP mode tcp bind LoadBalancerVIPHostname:443 ssl crt /etc/haproxy/haproxy.pem crt /etc/haproxy/certs/ ca-file /etc/haproxy/cafile.pem use_backend...
View ArticleRe: error when I moved vmdk (hard disk)
This is kind of tricky, because the VM has two virtual disks with the same base name "SUSE Linux Enterprise 11 64-bit.vmdk", which must have been located in separate folders. Do you still have the...
View ArticleRe: Problems logging into vSphere Web Client with Firefox 42
This is addressed for 6.0 too in the 6.0 update 1 http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2130672 Suhas
View ArticleRe: error when I moved vmdk (hard disk)
I will have to sign off now for today. Anyway, in case you can find the mentioned parent virtual disk, then you'll have to edit the "SUSE Linux Enterprise 11 64-bit-000001.vmdk" file, adding the...
View ArticleRe: Unable to create project due to unknown error ( VHA 5.0.6)
This can happen when you start working on a newer build where there have been some UI changes on Javascript side. VHA doesn't automatically refreshes the client-side content. Can you try refreshing...
View ArticleRe: using -match I want to write output in a statement
In $array you have a number of PSCustomObject entries, where each has an IP property.You could find the match/nomatch like this #Connect-VIServer vct-00-ls ##$match_address = Read-Host "Enter the ip...
View ArticleRe: Redploying a vcenter webclient plugin
"Check for New Plugins" did not help my issue. It helps install a plugin without logging out and logging in. But the scenario I have posted above is different. In my scenario, vCenter was trying to...
View ArticleHow to display the VMwave ESX version
I have a CISCO UCS blade chassis with 4 blades (all B200 M4) and I need to display the VMware installed/running on each from the vSPhere Web Client 5.5. Thanks,GlenG
View ArticleBug Report: erratic behavior of dual-display under Workstation 12.0.1 on...
I'm running an HP z800 with dual 30" displays (each is dual-link 2560x1600) on CentOS6 host O/S Working with guests and trying to use Dual-Displays is very erratic. For example, clicking the "Cycle...
View ArticleRe: How to display the VMwave ESX version
Check if helps: VMware KB: Determining the build number of VMware ESX/ESXi and VMware vCenter Server Determining the build number of ESX/ESXi using the vSphere Web ClientTo determine the build number...
View ArticleRe: Retire legacy ESX 4.1 cluster
Right click on the host that you want retire and select Remove. Note that if you're using Distributed Switch you will may need remove the host first from the vDS. After remove the hosts from the...
View ArticleRe: How to display the VMwave ESX version
Thanks, I found the following: VMware ESXi, 5.5.0, 1746974 GlenG
View Articlevmware workstation server is not starting after latest updates in ubuntu 14.04
Hi, this problem ossurs with WS11 or WS12. After an update to the latest version of Ubuntu 14.04 the vmware-workstation-server is no longer starting.There are errors with soap on 127.0.0.1 port 8307...
View ArticleRe: error when I moved vmdk (hard disk)
I change that you say and works Ok. I have the same file in folder e:\. I dont kwow what daeamon I do but it works. No I'm cloning vmware guest and I make a backup jejejeMany thanks for your help!
View ArticleClik here to view.
No saved restore points after booting SSD in Fusion and rebooting native EFI...
What happens to the restore points of my native bootable Windows 8.1 SSD, when booted the SSD in Fusion 8.0 (Trial) and then reboot again native? I made many, many more due to some extensive...
View ArticleIPSEC VPN to Server within vCloud environment
Hi, I have setup and successfully tested a PPTP VPN from an external client to a VPN on a VM within the vCloud environment. However the customer tells me they need an IPSEC VPN direct to the VM. I...
View ArticleNo Mac OSX 10.11 support on ESXi 6.0 B3247720
I have a standalone ESXi server (no vCenter) and I manage it either through vSphere wweb client or VMWare Workstation 12 (remote connection to server). I usually create my VM's through VMWare...
View ArticleClik here to view.
Error: The specified version was not found
Distributor ID: UbuntuDescription: Ubuntu 14.04.3 LTSRelease: 14.04Codename: trusty Just installed workstation player 12.0.0 and VIX...
View Article